DE Find a Retailer

Launch in preparation

MebaHeart Car Table Black

Cup Holder Table for Car & Outdoor

Materials tested to REACH/SVHC²

Colour

Black White

Model CTD135B GTIN 4262602670005

RRP € 109.99

Find a retailer

Recommended retail price incl. VAT. No purchase on this page, the product is sold through specialist retailers. We will point you to where you can get it.

  • (5 / 5)

    At the Supercharger I can work comfortably on my laptop and put the charging break to productive use.

    Lars H.Tesla Model Y (2024)

  • (5 / 5)

    I can finally eat comfortably in my parked Model 3 without balancing everything on my lap.

    Max B.Tesla Model 3 (2023)

  • (5 / 5)

    With the legs fitted it turns into a handy outdoor table in seconds.

    Saad B.Tesla Model Y Juniper (2026)

Open laptop on the black tabletop above the front centre console of a parked Tesla

Your cup holder becomes a surface.

Insert, tighten, place the top. No drilling, no glue.

One product, three functions

Changed over in one motion.

  1. Two hands holding the black tabletop, showing the matte silicone surface and both round cover plates

    Level work surface

    With both flat cover plates fitted the surface is completely level. Room for a laptop, a plate or paperwork.

  2. Black tabletop above the rear seat with two iced coffees in the drink holders and two food items on paper

    Two cup holders

    Cover plates out, cup holder inserts in. Two recessed holders for cups and bottles, steady while you eat.

  3. Black tabletop on its telescopic legs outdoors, taken from the assembly video

    Camping table

    Push the three telescopic legs in, turn until they click, flip it over. A side table by the tent, at the charger or out fishing.

Mechanism

Fit it once, and it stays put.

  • Base into the cup holder, tighten the wheel, done
  • Set the tabletop on magnetically, rotates 360°
  • Remove with a straight upward pull, no twisting, no tools
  • Macro of the knurled clamping wheel that tensions the stand inside the centre console cup holder

    Clamping wheel: tensions the base inside the cup holder

  • Underside of the tabletop: the magnet pin at the top of the stand tube seated in the mounting plate

    Magnetic seat: the tabletop finds its position

  • Black tabletop on its stand in the centre console cup holder, with the knurled clamping wheel of the base visible

    Fitted: firm in the cup holder, steady in the vehicle

Side table

Front, rear, outside.

Up front for driver and passenger, at the rear for everyone else, and on its three telescopic legs the same tabletop stands on its own next to the car. At the charger, by the tent, out fishing, or simply wherever there is no surface.

  • The table on its legs at dusk in front of a tent, a camping lantern standing on it
    Evening at the tent. Lantern on top, chairs out, and the day is done.³
  • The table on its legs by a river with a moka pot and cups, a fishing rod beside it
    By the river the coffee brews while the rod does the work.³
  • Optimised for Tesla Model 3 & Model Y
  • Tool-free mounting
  • Tested to REACH/SVHC²
  • In the car and outdoors
  • Based in Düsseldorf

From our customers

This is how it looks in real cars.

Photos from the test phase, taken by the drivers themselves. The vehicle is named under each picture so you can picture it in yours.

  • Customer photo: tabletop above the centre console in the cockpit of a Tesla Model Y with a white interior
    Tesla Model Y (2024) · centre console
  • Customer photo: black tabletop at the rear centre console of a Tesla Model Y with a white interior
    Tesla Model Y (2024) · rear seat
  • Customer photo: laptop on the tabletop above the centre console of a parked Tesla Model Y
    Tesla Model Y (2024) · driver's side
  • Customer photo: white tabletop above the centre console of a NIO ET7
    NIO ET7
  • Customer photo: a bottle and a glass on the black tabletop in a Tesla Model Y Juniper
    Tesla Model Y Juniper (2026)
  • Customer photo: a plate of food on the tabletop on the passenger side of a parked Tesla Model Y
    Tesla Model Y (2024) · passenger side
  • Customer photo: black tabletop above the centre console of a Tesla Model Y in a car park
    Tesla Model Y (2024) · rear-wheel drive
  • Customer photo: black tabletop between the rear seats of a Tesla Model Y with a white interior
    Tesla Model Y (2024) · rear seat
  • Black tabletop in the cockpit with a smartphone in the magnetic holder, the clamping wheel visible
    Phone holder
  • A hand on the smartphone held magnetically on the black tabletop, the vehicle display on the left
    Phone holder
  • Smartphone in the magnetic holder on the black tabletop, seen from below against the side window
    Phone holder
  • Magnetic phone holder with a smartphone on the black tabletop above the rear seat, a coffee cup beside it
    Phone holder
  • A hand lifting a smartphone off the magnetic holder on the white tabletop
    Phone holder
  • A hand pulling a tissue from the magnetic tissue box on the white tabletop, a coffee cup in the drink holder beside it
    Tissue box
  • Tabletop leaning upright against the rear seat with the anti-slip mat, the magnetic tissue box holding on without falling
    Holds even upright
  • Grey fabric tissue box with two tabs, on white
    Tissue box
  • Magnetic holder with a bin bag on the black tabletop, a coffee cup in the drink holder next to it
    Bin bag holder

In development

Magnetically expandable.

The tabletop is held magnetically on the base, with no screws and no catch. We are building on exactly that principle: accessories are simply set down, hold by themselves and come off with one pull. A phone holder, a tissue box and a holder for a rubbish bag are in development.

Prototypes. Not part of the set yet and not available to order.

Specifications

Every dimension at a glance.

340 × 340 mm approx. 225 mm
Dimensions: top view and side view
Tabletop
340 × 340 mm
Height in vehicle mode
approx. 225 mm
Weight (set)
approx. 2.04 kg
Materials
ABS, aluminium alloy, silicone
Load capacity
Max. load 6 kg¹
Mounting
front or rear centre console cup holder, tool-free
Testing
Materials tested to REACH/SVHC²
Origin
Made in China

Dimensions are rounded.

The package contents on white: black tabletop, cup holder base with tube and two drink holder inserts

In the box

One set, complete contents.

  • 1× Tabletop with silicone surface
  • 1× Cup holder base
  • 2× Cup holder inserts
  • 2× Flat cover plates
  • 3× Telescopic legs
  • 1× Anti-slip mat
  • 1× Instructions DE/EN

The anti-slip mat is optional in use. The table works with and without it.

  • The three telescopic legs side by side on white
    Telescopic legs
  • The removable silicone mat in black and white side by side, on white
    Anti-slip mat, removable. Both colours shown, each set contains the one matching its tabletop
  • Black tabletop standing on the three telescopic legs on white
    Set up as a side table
  • Black tabletop mounted on the cup holder base, on white
    Mounted in the cup holder

Product Questions

Will the table fit my Tesla?

Yes. The MebaHeart Car Table fits Model Y from the 2021 to 2024 model years and the new Model Y from 2025. It mounts in the standard front center console.

Yes. The Car Table fits Model 3 from the 2019 to 2023 model years and Model 3 from 2024 (Highland). The drivetrain makes no difference to the fit.

The mount sits inside the front or rear center console cup holder. Installation requires no tools and no modification to the vehicle – removal leaves no scratches or residue.

Yes. The tabletop provides a stable surface for a laptop and is suitable for working during a charging stop or waiting time. The vehicle must remain stationary.

No. The MebaHeart Car Table is designed only for use while the vehicle is stationary. Remove the table or empty it completely before setting off, and stow all loose items securely.

Do not use while driving. Remove the table or empty it completely before setting off. Do not mount in the airbag deployment area. Max. load 6 kg (manufacturer's specification). Not a toy.

Yes, in most of them. The cup holder base clamps into a round cup holder and the clamping wheel adapts it to the diameter. We optimised and tested the table for the Tesla Model Y and Model 3, and it is already in use in other vehicles too. Just try it, and if it does not sit properly in yours, get in touch.

Two ways to stay informed.

You want to buy the table

We will let you know as soon as the MebaHeart Car Table is available from a retailer.

Find a retailer

You sell vehicle accessories

Product samples, sales material and terms are available in the retail partner area.

Become a retail partner